If there is a geyser installed in the bathroom, then know the correct way to use it, there will be no harm.

Tech News Desk, Bathing with cold water in winter is not everyone's cup of tea. That's why we use geysers for hot water. In winter, apart from bathing, hot water is also required for daily activities. Geyser fulfills this need. But, do you know that it is also very important to use the geyser properly? If you want to use geyser with caution then read this article completely.

What is a geyser?
Geyser is an electronic machine that heats water. It is usually installed in the bathroom so that hot water can be provided for bathing. It consists of a tank and a heating element that heats the water. When you turn on the geyser, it heats the water in the tank using electricity, gas or solar energy. Then hot water comes out through tap or shower.

Important tips for geyser
If you want to know how to use the geyser properly in the bathroom, then definitely pay attention to these tips.

Install the geyser at the right place: Install the geyser at a place where water and electricity or gas supply is easily available. Make sure the place is clean and ventilated.

Get the installation done by a professional: It is very important to install the geyser properly. Therefore, it would be better if you get it installed by a professional.

Connect the geyser to water and electricity: Connect the geyser to the water supply and electricity or gas supply. Check that all the connections are proper and there is no water dripping from anywhere.

Turn on the geyser: Turn on the power switch of the geyser and wait for the water to heat up. Geysers have indicator lights which tell whether the water is heating or not.

Set the temperature: Set the water temperature using the geyser's control panel or knob. Initially set moderate temperature and then increase or decrease it as per your need.

Wait for the water to heat: Allow some time for the geyser to heat the water. Depending on the model and capacity of the geyser, the water may take a few minutes to heat.

Check the water temperature: Once hot water comes from the geyser, turn on the tap or shower. Check the temperature of the water to check that the water is not too hot and is safe to use.