Is your car stuck in PUC investigation? Know the real reasons and how to get the certificate again

Automobile desk: It is very important for every car and two-wheeler plying on the road to have a valid Pollution Under Control (PUC) certificate. This document confirms whether the emissions from your vehicle are within the prescribed standards or not. According to the rules of the Motor Vehicles Act, driving without a valid certificate may result in a heavy fine. In many circumstances, one may have to face strict action like license suspension or vehicle confiscation.

Often vehicle owners face problems when the emission level of their car or bike turns out to be more than the prescribed limit during regular checkups. There can be many reasons behind this like old engine, lack of service for a long time or substandard fuel filling. If your car has also not passed this test, then instead of panicing, follow these five practical steps.

Examine the check slip carefully

When a vehicle fails an emissions test, the first thing to do is look carefully at the report you receive. In this slip it is recorded which gas in the vehicle is going above the prescribed limit. Usually the test stops when carbon monoxide and hydrocarbon levels increase. Showing this report to an experienced mechanic goes a long way in finding the root cause of the problem.

Get your vehicle serviced on time

If your car or bike has been put off getting serviced for a long time, it is best to take it to a reliable workshop. Get the mechanic to check the condition of the engine oil and oil filter and get them replaced if necessary. Old or thickened oil increases friction within the engine, which negatively affects performance as well as emissions.

Checking the Air Filter and Spark Plug

If the air filter of the vehicle gets filled with dust and soot, then the engine does not get air as required. Due to lack of air, petrol or diesel does not burn properly and a lot of smoke starts coming out. Therefore, get the air filter cleaned or get a new one installed if it gets damaged. It is equally important to check the condition of the spark plugs in petrol vehicles, because a weak or worn plug can cause incomplete combustion and increased pollution.

See Fuel Injector and Exhaust System

Dirt accumulated in the fuel injector can impede fuel flow, disturbing the mixture's balance. Get the fuel injector and throttle body checked by a mechanic and get them cleaned as needed. Apart from this, the silencer and catalytic converter should also be checked. Emission standards may be affected in case of any leakage or blockage.

Fill fuel only from a reliable pump.

Adulterated or poor quality petrol and diesel can also create obstacles in emission testing. Therefore, always make a habit of filling fuel from a reliable fuel station only. After necessary repairs and cleaning, drive the vehicle for a few kilometers so that the engine comes to normal working temperature. After this, get tested again and get the certificate if the standards are met.

Don't forget to follow Read.Com's WhatsApp channel.

Leave a Comment