Smell and less cooling coming from dirty cooler? Do cleaning like this in minutes, you will get excellent cooling

By Samira Vishwas On May 1, 2026

Cooler Cleaning: As soon as the summer season arrives, a cooler becomes a necessity for every home, but if the cooler is dirty, not only does the cool air get less, but the risk of bad smell and bacteria also increases. Many people avoid cleaning the cooler considering it a hassle, whereas if cleaned properly, the cooling of the cooler can increase manifold.

If you also want your cooler to provide cool air like a new machine, then you just have to follow some easy tips. The special thing is that these methods are not only fast but also very economical. Let us know easy and effective ways to clean the cooler in minutes.

First turn off the power
Before starting to clean the cooler, completely disconnect it from power. This is very important for your safety. After this, keep the cooler in such a place where water can drain easily.

clean the water tank
Remove old water accumulated in the cooler tank. Often moss, dust and dirt gets accumulated in it. Wash the tank with clean water and if necessary, add mild detergent or vinegar and scrub with a brush.

cleaning cooling pad
The cooling pad is the main part of the cooler’s cooling system. Take them out and wash them with clean water. If the pads are very dirty, clean them by soaking them in mild soap or baking soda solution for some time. This will also eliminate the smell.

Fan and blade cleaning
Dust accumulates on the fan and blades inside the cooler, which reduces the air flow. Clean them thoroughly with a dry cloth or brush. Take care that water does not get into the motor.

check pipes and pumps
The pipe and pump supplying water should also be clean. If dirt accumulates in them, the flow of water may stop. Remove the pipe and flush it with water and also clean the pump gently.

Anti-Bacterial Cleaning Tip
To avoid bad smell in the cooler, you can add a little alum or neem extract to the water. This will prevent bacteria from growing and the air will remain fresh.

Use only after drying
After cleaning, allow all parts of the cooler to dry thoroughly. Only after this start the cooler again. Due to this there will be no risk of short circuit or malfunction.