What to do if the cloth sticks to the press? So adopt these effective remedies, the black layer on the ironing plate will be cleaned within minutes!

By Samira Vishwas On Feb 28, 2026

Tezzbuzz Desk- Ironing clothes before going out anywhere is a habit of almost every household. Most people do not like to wear clothes without ironing. But sometimes due to haste or high temperature, the clothes get burnt and a black burnt layer accumulates on the ironing plate.

Not only does the iron not work properly, but it also increases the risk of stains on the clothes. The good thing is that with some easy home remedies you can make your press clean and shiny again. Just use water sparingly when cleaning, as excess moisture can damage the press.

Why does a black layer form on the press plate?

There can be two main reasons for cloth sticking to the ironing surface:

extremely hot temperatures – Due to excessive heating, the cloth gets burnt and sticks to the plate.
plate coating damage – If the surface of the plate is damaged, it may need to be replaced.

What to do before starting cleaning?

If the cloth is stuck on the press, first remove it carefully.

Remove the burnt part with the help of a knife or any thin object only when the iron is still slightly hot.
It may be difficult to remove the layer once it cools completely.
Do not apply too much force, otherwise the plate may get damaged.

Easy home methods to clean press plate

cleaning with white vinegar

White vinegar is considered helpful in removing burn marks and grease. Mix vinegar in lukewarm water. Clean the plate gently with the help of a cloth.

Home remedy using salt and newspaper

This is a very popular and effective method. Spread salt on newspaper or thick paper. Slowly move a warm iron over the salt. Keep in mind that the iron should not be too hot.

Shine the plate with toothpaste

White toothpaste acts as a mild cleaner. Apply some toothpaste on the brush. Lightly rub the dirt accumulated on the plate. Later wipe with a clean cloth.

What to do immediately if the cloth sticks to the press?

First of all, turn off the iron.
Let it cool slightly.
Remove the stuck cloth slowly.
Do not apply force with any sharp or rough object.
After this, clean the plate by any of the methods mentioned above.

Important things to keep in mind

Do not use too much water on the press plate.
After cleaning, wipe the plate thoroughly with a dry cloth.
Next time you press clothes, set the temperature according to the fabric.

The black layer on the ironing plate is not a big problem, provided you adopt the right measures in time. These easy home remedies can get your press clean and shiny again. Take a little care and keep your iron in perfect condition for a long time.