Dyson says the Dyson Nurovi line is a smarter option than standard robot cleaners. The company is also aiming this lineup at brands like Shark. Dyson wants stronger footing in the premium robot vacuum market. Dyson is pitching the Nurovi range to compete more directly with other top makers too. Those include Roborock, Dreame, and iRobot. CNET says older Dyson robot vacuums did not always hit the same cleaning results as some rivals in lab checks. With Nurovi, Dyson is trying to close that gap. Dyson just rolled out a fresh robot vacuum line.
R3 Nurovi: UV stain spotting
The R3 Nurovi Spot+Scrub UV is the one that stands out most. Dyson calls it its first robot vacuum that uses UV light. The idea is to shine UV on the floor so stains show up in ways you might miss in normal lighting. It pairs the UV light with a camera that runs on AI. There is also green LED lighting in the mix. CNET says Dyson estimates it can spot about 200 kinds of household spills and substances.
Scrubbing built for tough messes
The R3 is meant to link the stain check with real scrubbing. CNET reports it uses a 12-point hydration setup. Heated water is routed to the microfiber roller. The roller reaches out toward the edges of the floor as it works. Dyson’s own write-up also stresses a wet roller that cleans itself and a method focused on stain removal. Dyson says its Spot+Scrub tech can go back over messy spots more than once.
R2 Nurovi Targets Corners
The R2 Nurovi Wash+Dry uses a different setup. Its key feature is a set of Reuleaux triangle mop pads. Dyson notes that round pads can miss the corners of rooms. These pads are shaped to help with that. Dyson says the pads keep a steady width as they move. It also says the pointed parts can reach deeper into corners and along edges. The robot uses a side-to-side movement pattern to make firmer contact near walls.
R1 Dyson Nurovi Focuses on Dry Cleaning
The R1 Nurovi Dry is the simplest model in the group. It is built for dry cleaning on hard floors and carpets. It does not focus on washing and drying like the other units. It still uses the Twin-capture system. Dyson also includes acoustic dust sensing to track dust levels. The machine can then change how it cleans based on what it detects. Dyson says it can adjust in real time as floor conditions shift.
Final Thoughts
Dyson’s Nurovi line suggests the company is moving past the idea that a robot vacuum should only copy the usual cleaning routine. Dyson says it uses cameras, AI, sensors, and physical cleaning parts. The goal is for the robot to understand what it sees and then change its cleaning mode as it goes. The R3 Nurovi Spot+Scrub UV shows this most clearly.
It does more than scan a room and follow a fixed route. It is built to find stains you might not notice at first, decide when extra scrubbing is needed, and then check the area again. This new Nurovi range also looks like Dyson wants robot cleaning to feel smarter, not just faster. It is trying to deal with limits that show up in common robot vacuums.