Bathing in the winter with the geyser on? Danger can happen at any moment!

The water in the tank is getting very cold in the morning when winter is coming. So geysers have been turned on in many houses now. But keep the geyser switch on during the bath? Many people forget to turn off the geyser (geyser safety) in haste. However, even a little carelessness in using electrical appliances in wet places like bathrooms can lead to danger. Accidents can occur not only from electric shock, but also from overheated water. So it is important to know some rules of using geyser (water heater) at the beginning of winter.

Is it safe to keep the geyser on while bathing?

Geyser Safety Tips It is safe to keep the geyser switch off while bathing. There are a few risks to keep in mind when using instant geysers, whether in storage.

1. Risk of electric shock

Water and steam are always present in the bathroom. In this situation, if there is a fault in the electrical switch, socket or wire, there may be a risk of short circuit or electrocution. It is especially dangerous to touch switches or electrical connections with wet hands.

2. Overheated water can burn the skin

If the geyser temperature is set too high, the water may overheat. If the water falls on the face or head due to carelessness, there is a risk of skin burns. Hot water may also splash in the eyes. So it is important to check the water temperature before taking a bath.

3. Defects in equipment can increase the risk

If the geyser's thermostat or safety system is not working properly, the water may overheat. Even if there is a problem with the pressure release valve in the storage geyser, there is a risk of pressure build-up. Faults inside the device can also cause serious accidents. However, it is not only if the switch is on for a long time that the geyser will explode.

4. Keep away from flammable materials

Do not place matchsticks, lighters, candles or other flammable items near the geyser. Keep perfumes or sprays containing alcohol away from heat sources. Avoid storing unnecessary flammable materials in the bathroom.

What things to keep in mind before using the geyser?
1. Turn on the geyser before bathing

Turn on the geyser shortly before bathing as needed. Turn off the switch when the water is heated. Avoid the habit of running the geyser while bathing.

2. Check if earthing is OK

It is very important to have proper earthing in the electrical connection of the geyser. It can act as a protection system in case of power leakage. Get help from a trained electrician.

3. Install by an experienced person

Do not do the wiring or installation of the geyser yourself. Install properly by a trained electrician. Also check that necessary circuit breakers and earth-leakage protection systems are in order.

4. Check the thermostat

The thermostat controls the temperature of the water. If it is not working properly, the water may overheat. So check regularly and repair any errors quickly.

5. Check the pressure release valve

Pressure release valves are important safety measures in storage geysers. It helps release excess internal pressure. If there is a problem with the valve, seek professional help without attempting to repair it yourself.

6. Do not increase the temperature more than necessary

Set the water temperature as needed. Using very hot water increases the risk of burns. Sometimes it is recommended to keep the geyser temperature between 40-50 degrees centigrade. But adjust the settings according to your device's instructions.

7. Keep the exterior of the geyser dry

Do not allow water to accumulate on the geyser. If there is any damage, punctures or unusual noises on the cable, switch or external part of the device, discontinue use and check.

8. Do regular servicing

Mineral deposits inside the geyser, corrosion of components or faulty electrical connections can cause problems over time. Therefore regular servicing is essential as per the manufacturer's instructions.

Remember that using a geyser in winter is necessary, but carelessness is not at all. Turn off the switch by heating the water before bathing, do not touch the electrical connections with wet hands and stop using the geyser if there is any fault. A little caution can help prevent major accidents.

Leave a Comment