First, remove all utensils and food leftovers from the sink. Then, rinse the sink thoroughly with warm water and dishwashing liquid to remove all oil and grease from its surface. (Image source | iStock)
Before the sink is completely dry, sprinkle some baking soda on its surface. Then, gently scrub the sink with a soft sponge. Baking soda helps remove stubborn stains and grease. However, do not use a steel wire scrubber on the sink. This may scratch the stainless steel surface. (Image source | iStock)
Pour a little white vinegar over the baking soda. When these two mix together, foam will form. This mixture can help loosen water stains and some stubborn dirt. Leave it for about 5 minutes. Then clean the sink by gently scrubbing it with a soft sponge. (Image source | iStock)
Now take half a lemon and rub it gently on the edges of the sink and tap. The acidity of the lemon helps remove water stains and dirt while also adding a fresh scent. (Image source | iStock)
To avoid water spots on the sink, wipe it thoroughly with a dry microfiber cloth. After the sink is completely dry, take a few drops of coconut oil or baby oil on a cloth and apply a very thin layer on the surface of the sink. Then wipe it thoroughly with a clean cloth. (Image source | iStock)
This makes the sink surface look brighter and new water spots are less visible. Mixing baking soda and vinegar together primarily creates foam and causes a chemical reaction. Using both together is not always more effective than using them separately. (Image source | iStock)
Note: The information given in this news is based on general information. TV9 Punjabi does not confirm this.